Electronic Load LCR Benchtop Digital Bridge 100kHz-1MHZ Desktop Tester Meter Capacitance Resistance Impedance Inductance Measure(ET3510-1MHZ)

ET35 SeriesLCR digital bridges arehigh-precision component parameter analyzersmaking use of automatic balancing bridge principle, featuring 10 Hz~ 300kHz testing bandwidth, continuously adjustable frequency, 0.05% of basic measuring accuracy, automatic level control, list scanning and position counting, which can provide accurate and complete measurement and analysis for most components and materials, so it is wildly used in product R&D component incoming inspection and online product sortingFeatures10.05% basic accuracy;2.A maximum of 200 time/s measuring speed;3.Frequency measurement range of 10 Hz- 1MHz,Continuous adjustable, 1 mHzstep by step;4.Amplitude of excitation signal 10 mV-2 V adjustable,1mV step by step;5.Internal programmable DC bias voltage-2V~+2V;6.Support external dc bias voltage applied-60V~+60V;7.Support external current source8.V,I testing signal monitoring9.10-point list scanning testing10.10-grade sorting and counting11.100groups of correcting data for specified frequencies12.Automaticrange, manual range13.7" LED display screen, Chinese and English interfaces14.USB, Ethernet, RS232, Handler interfaces,GPIB(Optional).Main technical indexes:ModelET3501ET3502ET3503ET3505ET3510Test signal frequencyrange10Hz-100kHz10Hz-200kHz10Hz-300kHz10Hz-500kHz10Hz-1MHzFrequency resolution ,accuracyResolution:1mHz,Accuracy:0.01%Test parametersCp-D,Cp-Q,Cp-G,Cp-Rp,Cs-D,Cs-Q,Cs-Rs,Lp-D,Lp-Q,Lp-G,Lp-Rp,Ls-D,Ls-Q,Ls-Rs,Rs-Xs,|Z|-r,|Z|-d,|Y|-r,|Y|-d,G-BMeasuring display speedFast:50times/s(20ms ),Medium:10times/s(100ms ),Slow:1.25times/s(800ms )Custom measuringspeedBetween 0.5times/s-200times/s,Can be setLCR parameter rangeCp,Cs:0.001000pF~99.9999FLp,Ls:0.001000nH~99.9999kHRp,Rs,|Z|,Xs:0.001000m~999.999MG,B,|Y|:0.001000S~999.999kSr:±0.000001rad~3.14159radd:±0.000001deg~179.9999degD:±0.000001~9.99999Q:±0.001~99999.9Test signal voltage range0.01-2Vrms,1mV step, continuous adjustableVoltage resolution,accuracyResolution:1mV,accuracy:5%+5mVTest signal current range100Arms-20mArmsCurrent resolution,accuracyResolution:10A,accuracy:5%+50ADC bias voltage sourceInternal:-2V-+2V voltage bias,-20mA-+20mA current biasExternal :-60V-+60V voltage biasInternal resistance ofsignal source30 Ohm or 100 Ohm, selectableBasic accuracy0.05%Display resolution6 1/2 digitComparator9 groups of qualified setting, one group of unqualified setting, one group of auxiliary settingTriggered modeInternal,External,manual, busMathematicaloperationsCalibration functionSelf-calibration, open circuit,short circuit,load,100 groups of customised frequency pointList scanning10-point list scanning testingStorage deviceInternal/USB storage deviceInterfaceLAN,RS232,USB Host,USB Device,HandlerGPIB(Optional),General technical specificationsPower voltage:.AC/50Hz ±10%,<;20WDisplay: 7" TFT LCD, resolution 800*480Interfaces: LAN,RS232, USBHost,USB Deviceand HandlerService environment: 0°C-40°CSizes: 330mm*285mm*136mm (L*W*H)Weight: 3.6 kg

• High Precision and Accuracy: With a basic measuring accuracy of 0.05%, the ET35 series offers exceptional precision for testing a wide range of components, making it for R&D, incoming inspection, and online product sorting
• Wide Frequency Range and Adjustable setting: The ET35 series features a frequency measurement range from 10 Hz to 1 MHz (depending on the model), with continuous adjustability in 1 mHz steps, providing flexibility for various testing requirements
• Comprehensive Parameter Testing: Capable of measuring over 20 LCR parameters, including impedance, capacitance, inductance, and resistance, this series supports a wide array of applications in both component analysis and material testing
• Enhanced Speed and Efficiency: The ET35 series offers up to 200 measurements per second and supports 10-point list scanning, ensuring fast and efficient testing for high-volume applications
• Advanced Connectivity and User-Friendly Interface: With a 7" LED display, multiple interface options (USB, Ethernet, RS232, GPIB), and both Chinese and English interfaces, the ET35 series is designed for ease of use and seamless integration into automated testing environments